Here you can find out how to release the brake on an RR9-200.
Watch out:
Before releasing the brake, it is essential to attach the device to a towing vehicle. Make sure to only release the brake for towing the machine. After the towing process, the sequence needs to be repeated in reverse order to reactivate the brakes.
1. Start by loosening the valve on the opposite side of the emergency control. This is the valve with the red cap. Completely release it by turning it to the left.
2. Next, move to the emergency control side.
3. Set the black lever on the left side of the valve block to the middle position.
4. Some models have a valve, while others have a lever above the valve block. Open the valve or set the lever to ground control.
5. You can now release the brake using the hand pump!
Note:
The machine is now unbraked. If it is not attached to a towing vehicle, it will no longer be able to brake on its own.