Initial operation
      Back to home
      1. Help Center
      2. Rail-Road Work Platforms
      3. Initial operation

      Instructions for correct loading and unloading/unloading maneuvers - Transport status/transport position

      We explain the correct basic position for maneuvering, loading and unloading the RR14EVO.

      During maneuvering, loading, and unloading/loading maneuvers, the machine must always be driven in the transport position. All telescopes and arms remain closed and in the transport position. Only the basket/jib arm (green arrow) may be moved.

      image-png

      Note the display indications (machine in transport position). 

      Road Mode (fully stowed)

      image-png-2

      • The upper carriage must not be rotated and must be in the central position. The central position is in the middle above axle 1.
      • Insert the two locking pins to keep the machine centered (absolutely necessary during transport).
        image-png-3
      • Set the speed to turtle (low speed) for better maneuverability.

      Please note:
      If you see this display, the machine is NOT in transport position. Moving the machine if tilted by more than 3 degrees will no longer be possible. First, bring the machine into the transport position.