Common sources of error in the operation of our railroad machines
Machine does not drive at full speed
Check whether the telescope is completely retracted (telescope retracted and lowered).
Check whether the machine is centered on the middle position.
Pay attention to the display indications (icons in the upper area), these show you the maximum speed.
Telescope cannot be lifted
Check whether the axes are completely lowered or completely raised. If they are not yet in the end position, the telescope cannot be lifted.
Check whether the switch for the lifting height limitation is active. If this is active, the machine stops lifting the telescope for safety reasons.
No start of the main motor possible
Check whether the switch for the auxiliary motor is set to OFF. If this is set to ON, the main motor cannot be started.